Subtotal: $840.00
Subtotal: $840.00
SPECIFICATIONS Laser type : Semiconductor laser/Ga Al As Laser probe : 685 nm - 100 mW pointed (module) Treatment time : 0 - 60 mins Treatment Time : 0-99 minutes Pulse Frequency : 9 steps 10 Hz to 5KHz Sweep : 10 Hz to 5 KHz Pulse width : 100 us nominal
TECHNICAL DATA Mains voltage : 110V/220V, 50 or 60 Hz Supplied with following accessories : Main Unit : 01 No. Power cable : 01 No. Operating manual : 01 No. Safety Google : 02 Nos. IR 685nm - 100 mW pointed Probe : 01 No. New version Carry Case : 01 No.
APPLICATIONS Dermatological Conditions Rheumatic Conditions Degenerative Joint Disease Post-Traumatic and Post-Operative Conditions Rheumatoid Arthritis Conditions for which acupuncture is indicated
FEATURES:
Micro controller based stimulator cum tens
Two types INT galvanic pulse square and triangular
LCD display for therapy time and type
Treatment time & Treatment mode display
Soft touch key function
TECHNICAL SPECIFICATION: • INT. GAL Therapeutic: 30 – 300 mSec ( 1 m Sec steps) • Diagnostic: 01, .03, .1, .3, 1, 3, 10, 30, 100, 300 mSec
Treatment modes: Iontoporosis, Galvanic, Int. Galvanic, Faradic, Surged Faradic, TENS, TENS Burst • TENS: frequency 1-10 sec (1 sec step), Width 20-250 m sec (1 msec step) • Mains Voltage: 90 – 270V, 50 / 60 Hz • Safety class: Class I, Type BF (IEC 60601-1) • Dimensions: L x B x H – 23 x 20 x 8 cms
Features International standards and specifications 35 pre-programme condition wise with products Cable and electrodes checking mode User settable memory Light weight and compact design Easy to operate Future upgrade without change in hardware Dsp based circuitry outputs are in 100 % accuracy Large graphic lcd display Built in re-chargeable battery (optional) Universal input voltage 90v-270v
Specifications Carrier frequency 2000 hz/4000 hz Base frequency 0-150 hz ( 1 hz step ) Sweep frequency 0-150 hz ( 1 hz step ) Sweep modulation : 1/1 sec, 1/5/1/5 sec. 6/6/ sec Therapy modes- Four pole interferential, Four pole vector 90, Four pole vector 45, Two pole pre-moulded Output current 0-100 MA Timer 0-60min
Technical
Mains voltage 90-270v/50 or 60 hz Safety class i, type bf according to iec601-1 Dimensions lx bx h 30x 25x 10. 5 cms. Weight-2.5Kgs
SALIENT FEATURES
Light in Weight, Unbreakable ABS Cabinet, easy to carry.
Elegant Computerized Cabinet Design.
Inbuilt Disease based 28 Programs.
Inbuilt Patient Memory for storage.
RC, 4EL, 4ELV, 2EL modes facility.
Computerized LCD based model.
Weighs approx. 900 GMS. Size is L-210 MM, W-175 MM, H-85MM.
Available voltage: 110V/220V, 50hz AC
SALIENT FEATURES Light in Weight, Unbreakable ABS Cabinet, easy to carry.
Elegant Computerized Cabinet Design.
Inbuilt Disease based 14 Programs.
Inbuilt Patient Memory for storage.
Continuous, Slow Burst, Fast Burst, Continuous RAMP, Burst RAMP.
Unbreakable Electrode Wires.
Computerized LCD Based Model.
Weighs approx. 950 GMS. Size is L-210 MM, W-175 MM, H-85MM.
Voltage: 110V/220V
Package Includes
Main Body
Main Cable
Electrode
Manual
UNIQUE FEATURES Indications for NMES, Russian, 2 Pole IFC, 4 Pole IFC Waveforms Relaxation of muscle spasms Prevention or retardation of disuse atrophy Increase local blood circulation Muscle re-education Maintaining or increasing range of motion Additional Indications for 2 Pole IFC, 4 Pole IFC, NMES Waveforms Symptomatic relief of chronic, intractable pain Post-traumatic acute pain Post-surgical acute pain Indications for Iontophorasis Relaxation of muscle spasm Indications for Ultrasound
Application of therapeutic deep heat for treatment of selected sub-chronic & chronic medical conditions such as: Relief of pain, muscle spasms and joint contractures Relief of pain, muscle spasms and joint contractures that may be associated with: Adhesive capsulitis Bursitis with slight calcification Soft tissue injuries Shortened tendons due to past injuries and scar tissues
Relief of sub-chronic and chronic pain and joint contractures resulting from: Capsular tightness Capsular scarring
Specifications 1. 4 Pole IFC 4 Pole IFC (Interferential) current is a medium frequency waveform. Current is distributed through two channels (four electrodes). The currents cross each other in the body at the area requiring treatment. The two currents interfere with each other at this crossing point, resulting in a modulation of the intensity (the current intensity increases and decreases at the beat frequency). Beat Low 1 - 199Hz Beat High 2 - 200Hz Vector Static, 40%, and 100% Timer 1 - 90 min Intensity 0.0 - 99.9mA 2. 2 Pole IFC (Interferential) 2 Pole IFC (Interferential) current is a medium frequency Waveform. Current comes out of one channel (two electrodes). The current intensity is modulated: it increases and decreases at a regular frequency (the Beat Frequency). Beat Low 1 - 199Hz Beat High 2 - 200Hz ON/OFF Continuous, 5/5, 4/12, 10/10, 10/20, 10/30, and 10/50 Timer 1 - 90 min Intensity 0.0 - 99.9m ..Galvanic.. Interrupted Galvanic Current is a direct current flowing in one direction only. Frequency 1Hz, 3Hz, 50Hz, 100Hz Pulse Width 0.01, 0.03, 0.1, 0.3, 1, 3, 10, 30, 100, 300 (msec) Timer 1 - 90 min Intensity 0.0 - 99.9mA Russian Current Russian Current is a sinusoidal waveform, delivered in bursts or series of pulses to produce maximal muscle strengthening effects without significant discomfort to the patient. Ramp 0.5, 1, 2, and 5 sec ON/OFF Continuous, 5/5, 4/12, 10/10, 10/20, 10/30, and 10/50 Burst Frequency 0-100 Hz Duty Cycle .10%, 20%, 30%, 40%, 50% Timer 1 - 90 min Intensity 0.0 - 99.9mA ..NMES.. NMES is a symmetrical Biphasic waveform with a 100 µsec interphase interval. Because the pulse is relatively short, the waveform has a low skin load, making it suitable for applications requiring high intensities, such as in muscle strengthening protocols. Channel Mode Single, Reciprocal, and Co-Contract Width 20usec - 999usec Ramp 0.5sec, 1sec, 2sec, 5sec Frequency 1Hz - 200Hz ON/OFF Continuous, 5/5, 4/12, 10/10, 10/20, 10/30, and 10/50 Timer 1 - 90 min Intensity 0.0 - 99.9mA
Ultrasound Timer 1 - 90 min Duty Cycles : Pulsed 10%, 20%, 50% Continuous 100% Rate 16, 48, and 100 Hz Frequency 1/3MHz Intensity 0 to 2.5 W/cm2 5 cm2 Sound Head Frequency 1 MHz, 3.3 MHz (all +/- 5%) Power 0 watt to 10 watts Effective Radiating Area 3.5 cm2 ñ5 cm2 Maximum beam non-uniformity ratio 6:1 Beam Type Collimating Here 16 Protocols are available with default clinical parameter. Electrotherapy Pain Acute Chronic HNP Muscle Strain Sub- Acute Arthritis TMJ Lower Back Pain Phasic Workout SD Curve Width 300msec, 100msec, 30msec, 10msec, 3msec, 1msec, 300usec, 100usec, 30usec, 10usec Intensity 0.0mA - 99.9mA
Tonic Workout Edema Ultrasound Acute Superficial Acute Deep Chronic Superficial Chronic Deep Voltage available: 220V (For USA & Canada voltage converter 110V to 220V / 220 to 110V will be provided free of cost.)
Package includes
Main Unit : 01 No. without trolley
Cables : 01 set
Electrodes : 01 Set
Ultrasound Head 1/3 Mhz : 01 No.
Power cable : 01 No.
Operating Manual : 01 No.
P.S. Trolley will not supply with the unit. Trolley picture only ref. for customer.
Functional Electrical Stimulator
Model: WALK STIM®
Micro controller based circuitry
LCD display
Soft touch keys
Universal Input
DESCRIPTION
WALK STIM is an advanced single channel foot switch controlled micro controller based muscle stim..ulator manufactured by HMS Medical System. Our device is used for providing treatment to correct dropped foot due to upper motor neuron conditions. WALK STIM has Soft touch keys for selection of programs and built-in rechargeable battery. It is designed indigenously complying to international standards.
Specification
Frequency – 20 – 60Hz
Pulse width – 0 – 360 micro seconds
Output Current – 10 – 100 mA
Output Time – 0.3 – 6 sec
Delay – 0 – 2 sec
Ramp Time – 0 – 2 sec
Extension Time – 0 – 2 sec
Output Waveform – Symmetrical & Asymmetrical Biphasic
Exercise Duration – 5 – 100 min
Exercise ON period – 1 – 10 sec
Exercise OFF period – 1 – 10 sec
Exercise Ramp Time – 1 – 10 sec
Display – Graphic LCD Display
Power Source – Dual Power (Mains/Battery)
Technical Data
Mains Input Voltage – 90 V – 270V AC
Battery – 9V
Safety Class – Class I, Type BF (IEC 60601 -1)
Dimensions – L x B x H – 80 x 30 x 120mm
Weight – 400gms
Supplied with all standard accessories.
Features Both medium and low frequency currents 64 Pre-programs condition wise with protocols
Cable and electrode checking mode
User settable memory
Cap-sense keys
Built in rechargeable battery (optional)
Large graphic LCD display
Specifications Interferential
Carrier frequency - 2000 Hz / 4000 Hz
Base frequency - 0 -150 Hz (1 Hz step)
Sweep frequency - 0-150 Hz (1 Hz step)
Sweep modulation Programs - 1 /1S 1/5, 1/5S 6/6S
Therapy Modes - Four pole Interferential
Four pole Vector 90 o Four pole Vector 45 Two pole pre-modulated
Muscle Stimulator Currents
Plain galvanic – Continuous DC Current
Int. galvanic – Diagnostic – 0.01, 0.03, 0.1., 0.3, 1.3, 10, 30, 100, 300 mSec (in 10 mSec variation) Off Time – 500, 1000, 2000 mSec.
Faradic
Freq./P.width – 50 Hz/0.7 mSec.
Surge ON time – 1 -10 sec. (in 1 Sec.variation)
Surge OFF time – 1 – 6 sec. (in 1sec. variation)
Tens
Frequency – 2 – 250 Hz (in Hz variation)
Pulse Width – 20 – 250 sec (in 1 sec variation)
Burst Frequency – 1 – 4 Hz
Ultra Reiz
ON Time – 2 mSec
OFF Time – 5 mSec
Low Frequency
Alternating Current
Diadynamic Currents – DF, MF, CP, LP
Timer – 0 -60 minutes
Display – 128 x 64 Graphic back lite LCD display
Technical
Mains Supply - 90 - 270V / 50 or 60 Hz
Safety Class - Class I, Type BF (IEC 60601 -1)
Dimensions - L x B x H - 30x25x10.5 cms
Weight - 2.5 Kgs
Features Longwave Diathermy treatment is based on Capacitor Field It uses 1Mhz Alternating Current Frequency. Longwave improves circulation, reduces pain and improves Mobility Longwave gives penetration up to 4 cm Raised temperature duration is for 45 minutes Unlike SWD, Longwave will not produce any interference with other equipments. Unlike Ultrasound, Longwave will not have any irritation to boney parts Most of the energy remains in high density tissue like ligaments & tendons Consumes very less electricity compared to Shortwave Diathermy Solid State Design …..No valves or Crystals are used. Portable…only 3.5kgs
Specification WAVE LENGTH : 300 meters FREQUENCY : 1 Mhz. TIMER : 0 TO 30 MIN DISPLAY : Back Light LCD Display POWER : Variable in 10 steps, Digitally Controlled. MAINS : 230 V AC, 50 Hz and 110V voltage converter will be provided free of cost for USA / Canada WEIGHT : 3.5 Kg with accessories. SIZE : 11 x 29 x 26 cm ( H x L x W). Supplied Accessories Main Unit : 01 No. Applicator: 1No Lotion bottle : 1No Power cable : 01 No. • Operating Manual :1No.