Subtotal: $300.00
Vessel Sealing Systems
Model: MaxSeal
Multiple modes for superior functionality
Multiple Modes - 2 Cut modes,
5 Blend modes
3 EndoCut modes
2 Spray modes
2 Fulgurate modes
1 Dessicate mode
1 Bi-Cut mode
2 Bi-coag mode and 1 Seal mode for all types of procedures and all types of desired settings for superior performance.
100 Programs memory
100 programs memory to save all desired settings for all different cases. Recall on program selection.
Enertech's vessel sealing systems give you something no other electro surgical tool can – permanent vessels occlusion. This revolutionary technology replaces almost all other hemostatic tools because it doesn't just ligate vessels, it actually fuses vessel walls to create a permanent seal.
Across the range, Enertech Vessel Sealing technology delivers a unique combination of pressure and energy to create a consistent seal with each application :-
Shorter operating time - save almost upto 75% operating time.
Permanently fuses vessels upto and including 7 mm diameter and tissue bundles without dessication or isolation.
Faster and safer patient recovery.
Seals withstand 3 times normal systolic blood pressure.
Uses bodies own collagen, no requirement to insert foreign material into patient body which can cause complications.
Feedback controlled response system automatically discontinues energy delivery when the seal is complete, eliminating the guess work.
Each of the devices comprises with high power and low voltage bipolar mode and specialist
instruments that combine tissue compression with tissue heating to produce hemostasis in veins or a bundle of tissue.
The Product is delivered through a variety of Instruments for use in both Laparoscopic and open procedures in a range of surgical specialties, including gynecological, colorectal, urology and general surgery.
Performance Features
Patient plate conductivity monitoring system ( PP - CMS ) :
The advanced monitoring system gives a Real Time indication of the quality of the conductivity via the patient plate. There are 3 indicators. H = High contact and good conductivity. M = Medium Contact and medium conductivity. L = Low contact and poor conductivity. This Feature enables the monitoring of contact quality and hence significantly reduces the chances of plate failure resulting in burns
Accessories contact detection during plug in and operation :
Accessories are detected during plug in and indicator for the footswitch turns red with words “FS” indicating that the same are ready for operation. During Press mode the indicator turns green showing which mode has been activated, reducing chances of wrong mode operation.
For Technical Detail please see the listed photograph
The unit will be supplied with Electrosurgical Generator standard accessories.
Vessel Sealer accessories are optional.
Dimension ( W x H x D ) : 300 mm x 150 mm x 340 mm
Input Supply Voltage : 110V/ 230 VAC 50/60Hz
Weight : 5.5 kg
Power socket will be be provided free of cost as per country requirement.
SPECIAL FEATURES
Offers good choice of monopolar and Bipolar current.
Portable model attached with briefcase for safe handling.
Intensity variable accurately ( 50 to 100 watts output).
Ideal for minor and instant coagulation, dessiction and fulgeration.
Useful for E.N.T Surgeons, Dermatologists, General Surgeons and Cosmetologists.
APPLICATION
To Remove skin tags, warts, corns, Hair Restoring surgery, Forehead lift, Ablation of keloides, Palatoplasty, Kerotosis, Blephare plasty, Ritodoplasty, Leason removal, Tumottrs, Rehinepliyma, Epilation, Nipple reduction, Face lifts, Mamoplasty, Epistaxis, Augmentation, Development of skin flaps, To,gue Lession Removal, Abdominoplasty, Biopsies
Dermatology treatments
Cosmology Treatments
Collagen Remodeling
Skin Treatments
Ablation & Non ablation
Beauty Treatment
Plastic Surgery
Supplied Accessories
Surgical handle : 01 No. 5 Electrodes, : 05 Nos. Foot Switch : 01 No. Inactive Plate : 01 No. Tweezers with cable : 01 No. Main Cable : 01 No. Operating Manual : 01 No.
Power socket will be provided free of cost as per country requirement.
Technical Data
Intensity variable accurately (50 to 100 watts output).
Power supply: 110/220 V
The Technique of Radio Surgery involves the passage of high frequency radio waves ( 2 Mhz – megahertz) through soft tissue to cut, coagulate, or remove the tissue. Soft tissue resistance to there radio waves caused the cellular water in the soft tissue to heat, which produces steam, an results in cellular molecular dissolution of individual tissue cells.
The surgeon uses a hand piece with an active electrodes (different type of electrodes for different applications) to transmit the radio waves. The radio waves are focused on the tissue by an antenna plat ) Patient plate) that is positioned behind the tissue in contact with patient’s skin. Radio surgery in general practice has many advantages over conventional surgical techniques particularly dermatological, plastic and eye lid surgery, ENT Dental, quicker operating time; rapid healing, less tissue damage and less post operative discomfort have been observed and its wider use in hospital practice is recommended. Radio frequency is not to be confused with electro-surgery machine ( surgical diathermy) spark gap circuitry unit ( electro cautery) and uses completely new technique compared with scalpel surgery and other techniques and Radio energy does the cutting very light. A very high frequency radio wave 0-3-2 MHz and a fine needle or wire loop electrode which is held by the surgeon, radio energy passes between the cautery electrode and patient plate. It is concentrated at the needle end or wire loop electrode, resulting in the release of energy, which produces steam within the cells, thus vaporizing them and dividing the tissues. Standard Accessories: Monopolar Handle – 01 No. Patient Plate – 01 No. Electrodes - 01 Set Foot Switch – 01 No. Hand Switch – 01 No. Bipolar / forceps – 01 No. Cleaning Knife – 01 No. Power cable: 01 No. Operating manual: 01 No. Specification: Power Input 110 volts/220 volts Power consumption 150 Watts. Frequency 2 MHz Maximum Output: HF Monopolar 150 Watts on 400 ohm load HF Bipolar 100 Watts on 100 ohm load Coagulation 100 Watts on 1000 ohm Size: 8½ " x 7½ " x 4" Weight: 3.5 Kgs
Mini Electro Surgical Unit with Spark Gap Generator. Most suitable for skin Surgeons for Desiccation. Fulguration, Coagulation and Epilation Bipolar and Unipolar current modes are available.
Standard Accessories :
Surgical handle, : 01 No. 5 Electrodes, : 05 Nos. Electrolysis Needle, : 01 No. Foot Switch : 01 No. Inactive Plate : 01 No. Tweezer with cable : 01 No. Main Cable : 01 No. Operating Manual : 01 No.
Power socket will be provided free of cost as per country requirement.
Technical Data : Cutting output (low) : 20 watts Cutting output (low) : 40 watts Bi-polar output (-) : 30 watts Power supply : 110V/220V
No Electro Magnetic Output
Harmless even for patients with PACEMAKER where heat alone is required
Weighs approx. 950 gm. Size: 15 x 9 x 7cm.
Operates on 230V AC mains supply
For 110 V use power converter required
Provided with two tips.
Set includes console unit
cord and operating pencil.
Ideal for most minor surgical conditions, cauterization work, removal of skin warts and molluscum (M.C), etc.
Works at optimal temperature of 600°C.
Benefits
Solid state circuit system ensures safest procedures to delicate tissue involved for Cataract, Retinal and IOL Surgery.
Can be used with irrigation (wet-field) or in the bloody field itself, to locate the bleeder easier to enable the surgeon to have better visualisation.
Useful for Ophthalmic surgical procedures and for delicate surgery reducing tissue trauma.
Coagulation with saline irrigation reduces tissue heating, shrinkage, drying and sticking of coagulum to the forcep tips.
Features
Foot controlled system gives convenience to surgeons.
Forceps, Erasers and Cables are autoclavable.
Digital display for easy setting.
Imported Forcep and Erasers can be attached.
Audible tone lets surgeon know the unit is activated.
Compact in size, elegant look and portable.
Supplied accessories as shown in the photograph
Where 110V available please use power converter, we do not supply power converter with the unit
Available Power supply : 220V